Recent research suggests that molybdenum carbide (β-Mo₂C) has the potential to be a cheap and active substitute for Pt-based electrocatalyst for hydrogen evolution reaction. In this article molybdenum carbide (Mo₂C) electrocatalysts  mmobilized on carbon support were synthesized and evaluated for hydrogen evolution reaction (HER). The quantity of Mo in the samples was varied to understand the effect of Mo content in Mo₂C/C electrocatalyst on the structure, morphology, electrochemical properties and HER. The Mo weight percentages determined by ICP-OES technique in four Mo₂C/C samples prepared were found as ~9.3, 15.8, 20.4 and 28.0. SAXS studies revealed that the pore size of the carbon increased with an increase in Mo content, most probably to accommodate the Mo₂C motifs. X-ray photoelectron spectra showed that the amount of low valent Mo increased as we increased the Mo content up to 20 wt % but decreased in the 28 wt % sample. All the samples were active for electrochemical HER with the sample having ~20 wt % Mo showing the highest activity and exhibited a Tafel slope of 69 mVdec^-1. Among all samples the 20 wt% Mo sample exhibited the highest electrochemical surface area (ECSA) of ~2.92 mFcm^-2 and minimum charge transfer resistance for the HER. Thus, it is concluded that 20 wt% Mo in Mo₂C/C electrocatalyst evolves with ideal pore size, highest ECSA, smooth charge transfer and thus exhibits the best electrochemical properties for HER.