The present experimental investigation in a scaled facility of an Indian pressurized heavy water reactors (PHWRs) is focused on the heat transfer behavior from the calandria vessel (CV) to the calandria vault during a prolonged severe accident condition in the presence of decay heat. The transient heat transfer simulates the conditions from single phase to boiling in the calandria vault water, partial uncovery of the CV due to boil off of water in the vault, and refill of calandria vault. Molten borosilicate glass was used as the simulant due to its comparable heat transfer characteristics similar to prototypic material.About 60 kg of the molten material was poured into the test section at about 1100^°C.Decay heat in the melt pool was simulated by using high watt cartridge type heaters. The temperature distributions inside the molten pool across the CV wall thickness and vault water were measured for prolonged period which can be divided into various phases,viz., single phase natural convection heat transfer in calandria vault, boiling heat transfer in calandria vault, partial uncovery of CV, and refilling calandria vault. Experimental results showed that once the crust formed, the inner vessel temperature remained very low and vessel integrity maintained. Even boiling of calandria vault water and uncovery of CV had negligible effect on melt, CV, and vault water temperature. The heat transfer coefficients on outer vessel surface were obtained and compared with various conditions.