BARC/PUB/2011/0531

 
 

Design and development of repetitive capacitor charging power supply based on series-parallel resonant converter topology

 
     
 
Author(s)

Patel, A.; Nagesh, K. V.; Kolge, T.; Chakravarthy, D. P.

Source

Review of Scientific Instruments, 2011. Vol. 82 (4): pp. 045111.1-045111.11

ABSTRACT

LCL resonant converter based repetitive capacitor charging power supply (CCPS) is designed and developed in the division. The LCL converter acts as a constant current source when switching frequency is equal to the resonant frequency. When both resonant inductors’ values of LCL converter are same, it results in inherent zero current switching (ZCS) in switches. In this paper, ac analysis with fundamental frequency approximation of LCL resonant tank circuit, frequency dependent of current gain converter followed by design, development, simulation, and practical result is described. Effect of change in switching frequency and resonant frequency and change in resonant inductors ratio on CCPS will be discussed. An efficient CCPS of average output power of 1.2 kJ/s, output voltage 3 kV, and 300 Hz repetition rate is developed in the division. The performance of this CCPS has been evaluated in the laboratory by charging several values of load capacitance at various repetition rates. These results indicate that this design is very feasible for use in capacitor-charging applications.

 
 
SIRD Digital E-Sangrahay